I absolutely love the Gilded Autumn Designer Paper for fall cards and I noticed there was one pretty, but kind of odd patterned paper that I hadn’t used. It is actually the opposite side of this acorn and leaf paper and I had planned to use both sides on this card. But then I didn’t! I liked just the acorn and leaf print on this paper so I only used this one side on my Gilded Autumn Fall Acorn Card.
This card is just a simple, basic design we can all make very easily. You can keep it very simple or add some embellishments. It’s just a layer of designer paper on top of the card base and a greeting. That’s really all you would have to do.
The card base is Mint Macaron, one of the coordinating colors with the Gilded Autumn Specialty Designer Series Paper. This paper with its fall colors also has some papers with Gold Foil or Copper Foil accents. That’s what makes it so beautiful. It’s one of my favorites this season!
The greeting is stamped on Very Vanilla from the Gather Together Stamp Set. Then it was die cut with a circle in the Stitched Shapes Dies and layered on a Mint Macaron scalloped circle that I already had in my package of paper! I popped up the greeting on Stampin’ Dimensionals.
Running underneath the greeting is a Just Jade ribbon in the Flowers For Every Season Ribbon Combo Pack. It’s not a perfect match but I think it is close enough and I like the gingham ribbon.
I couldn’t finish the card without doing a little more embellishing! I had a piece of the Forever Gold Laser-Cut Specialty Paper laying out on my desk and thought I’d see if some gold leaves would look okay behind the greeting. Then on the bottom of the greeting, I added three of the smallest Gilded Gems.
So if you are looking for an easy card to make for fall, just follow this simple design!
I might have seen a tree with a few yellowish leaves at the top the other day when we were out for a walk so I was inspired to hope for fall and make this Gather Together Fall Colored Leaves Card. The weather has even been a little cooler lately (in part thanks to Tropical Storm Beta). In fact, the night before last I almost a felt a little cool on my legs wearing shorts. Yes, in Houston, Texas we are still wearing shorts, complaining about the heat, and running the air-conditioner. It kills me to see pictures way up north of trees with beautiful fall colored leaves. But fall leaves will get here, too….just not until December!
I just wanted to make a simple fall card and this is it! The card base is Cajun Craze and the layer is Shimmery White Cardstock. I love Shimmery White Cardstock, as I have said many times before. It is the tiniest bit off-white and has a very subtle shimmer. It’s also good for watercoloring if you don’t have watercolor paper.
The stamps are in the Gather Together Stamp Set. They are just inked up with Memento Ink, stamped randomly on the card, and colored in with Stampin’ Blends. Just choose a variety of fall colors and color the leaves with whatever combinations you want. I think I used the Light and Dark of Daffodil Delight, Mango Melody, Old Olive, Granny Apple Green, Pumpkin Pie and a few others like Cajun Craze.
The little texture stamp is also in the Gather Together Stamp Set. I inked it up with Old Olive but stamped off first on my Grid Paper so it would stamp lighter. The greeting is also in the same stamp set and I just stamped that in Old Olive Ink on a scrap strip. For some reason I decided to just let the strip extend completely across the bottom of the card. I liked it.
I hope you are beginning to see signs of fall where you live. A few houses in our neighborhood have some Halloween decorations up. I think it’s a little early but I love to put up Halloween decorations, inside and out. Maybe this year I will go a little lighter since no one will be coming in to see them. But of course making myself happy with my favorite Halloween and fall decorations is just as important!
Here is another card I made with the leaves in the Gather Together Stamp Set you can check out for another idea.
If you don’t own the Stampin’ Blends alcohol markers, you could color these leaves with a sponge or Sponge Daubers or pick up ink and color in. There are lots of coloring techniques. Try your hand at making some fall leaf cards soon like this Gather Together Fall Colored Leaves Card.
You will absolutely love this fall designer paper in the Stampin’ Up! holiday catalog that I used on this Gilded Autumn Season of Thanks Fall Card. I had to resist the urge to try to decorate it any further. Sometimes you just have to tell yourself to stop! The card already has a lot going on just in the papers so no need for more bling!
The card base is Mint Macaron which matches the Mint Macaron diagonally striped pattern of the Gilded Autumn Specialty Designer Series Paper. This paper has gold and copper foil accents so it is very pretty but very difficult to photograph for a blog! All the shiny-ness of the foil makes for a lot of glare for a photograph, but in person is very pretty!
It looks like I covered the entire front of the card with the Mint Macaron striped paper, but in reality I just cut two 1″ strips and adhered them to each side of the card. The center panel with the leaf designs in gold and copper accents is cut at 3″ wide so that I could add Copper Foil strips along each side. The foil is cut at about 1/2″ x 5 1/2″. I luckily already had a strip of the foil that I only needed to cut the two lengths of. I lined everything up on my Grid Paper and adhered each copper foil strip to the side of the leaf paper, then adhered that directly to the card.
The greeting is from the Gather Together Stamp Set on page 47 in the holiday catalog. This was a favorite from last year and was carried over this year! It is stamped on Very Vanilla Cardstock in Mint Macaron Ink and then die-cut with an oval Stitched Shapes Die. This was then layered on a scalloped Layering Ovals Die cut out of Copper Foil.
For the inside of the card, I stamped a greeting from the same stamp set in Mint Macaron ink on a piece of Very Vanilla. I happened to have a tiny scrap of the same leaf design paper I have on the front of the card and the opposite side has these colored stripes. So I used that to adhere to the bottom of the card for a little interest when someone opens the card.
All in all, a pretty easy card to make. The paper makes it look very fancy and special! You could make it even easier with just one of the papers as a layer on the front of the card plus the greeting. Here’s another card I made recently with the Gilded Autumn paper. These cards will be so nice to have for Thanksgiving or any time in the fall season.
Try this Gilded Autumn Season of Thanks Fall Card or even change up the designer papers and make something with a different look.
I used several products on this Gather Together Fall Leaves Card, as I thought about them while making the card. I probably started out with a simpler version in my head of making this fall card, and then I came up with more ideas as I worked on it. That’s probably the way a lot of us do our cardmaking!
The beginning of the card was simply the stamping and coloring of the leaves in the Gather Together Stamp Set. You may already have this set if you purchased it last year. Happily, it was carried over into this August-December 2020 Mini Catalog as a favorite from last year! I stamped a few leaves in Memento Ink first but I thought the black outline was too stark. Then I stamped some in Soft Suede Ink. In the end, after they were colored, I’m not sure it made much difference so I think you can do either.
To color the leaves, I used Sponge Daubers and various ink pads. Just choose whatever colors you like for fall. I used Old Olive, Crushed Curry, Pumpkin Pie, Cajun Craze, and Granny Apple Green. I intended to leave parts of the leaves uncolored, but it didn’t so much turn out that way! I was sort of using a card on page 47 in the Mini as inspiration with the leaves. I didn’t try to be precise, especially as far as coloring “outside the lines” because I knew I would be cutting out the leaves anyway. I don’t own the dies but I don’t mind doing some “fussy-cutting” with my Paper Snips.
The card base is Early Espresso Cardstock with a layer of Very Vanilla to offset the layer of Gilded Autumn Specialty Designer Series Paper. This paper is so beautiful, it was difficult choosing which pattern to use. But I didn’t want to take too much away from the leaves so I chose a plainer pattern, not one with the gold and copper foil accents which are so pretty.
Next, I used a piece of Garden Green Cardstock to make a banner and embossed it with one of the Greenery Embossing Folders. These are narrower folders for smaller pieces you want to emboss. I also stamped the greeting in the Gather Together Stamp Set in Early Espresso Ink and die-cut it with a die in the Tasteful Labels Dies.
After adhering the layers together plus the banner on the card, I adhered two fall leaves with Stampin’ Dimensionals and added some of the gold foil pieces in the Forever Gold Laser-Cut Specialty Paper. I think they really add a little pop of pizzazz! The greeting was centered over everything, also popped up on Dimensionals. For a final touch, I added a bow made with the 3/16″ Braided Linen Trim.
It’s time to start making some fall or autumn cards, maybe just to send to friends and family and maybe to save for Thanksgiving. Who knows if we will be able to “Gather Together” this Thanksgiving so we might want to have cards ready to send to those people we want to remember on the holiday. This Gather Together Fall Leaves Card would suit the purpose just fine!
This Gilded Autumn Gather Together Card For Fall is one I created by copying a fall card I made last year with the same stamp set but using this year’s new designer paper! You can take any card or project you’ve made in the past and update it with a new greeting, new colors, new paper, new embellishments.
Here is the card I was copying from last year. Click the card to see the blog post.
The new Gilded Autumn Specialty Designer Series Paperin the Holiday August-December 2020 Mini Catalog is just beautiful this year with its earth tone colors and some copper and gold foil accents. I really like this paper! For the card base, I used Mint Macaron Cardstock because it goes with the pattern I wanted to use. This leafy pattern is what I used to cut out some leaves as embellishments.
Under the leafy pattern designer paper, I put a layer of Copper Foil. If you want to cheat, you can die-cut a piece out of the center of the foil, which will be hidden underneath the designer paper, if you want to use every bit of the foil sheets!
For the center of the card, to match the one from last year, I cut out a Copper Foil piece from the Stitched Nested Labels Dies. You can choose whichever size works best for your card.
The greeting, from the Gather Together Stamp Set, is stamped on Whisper White Cardstock in Mint Macaron Ink and die cut with a smaller Stitched Nested Labels Die. I added a little Gold Metallic Pearl on each side. The pumpkins and one gourd are cut out with Paper Snips by hand from the paper in the Gilded Autumn selection. I love the pattern with all the pumpkins and gourds! I just cut out three of them and a few leaves and adhered them to the front around the greeting. That’s all there is to it! Seems pretty simple, right?!
What is it about fall that makes us all so excited to expect it and to make fall projects like colored leaves and pumpkins and more?!
Be sure to check out the Gilded Autumn Specialty Designer Series Paper in the new Stampin’ Up! Online Store because the photos of the paper are really great! Next best thing to seeing them in person!
The Gilded Autumn Paper and the Foil Sheets are so pretty that’s almost all you need on this Gilded Autumn Gather Together Card For Fall.
I was anxious to play with this gorgeous designer paper in the new August-December 2020 Mini Catalog from Stampin’ Up! The designs are so pretty, the colors beautiful, and all of it accented with copper and gold foil. How can you resist?
This beautiful paper is the Gilded Autumn Specialty Designer Series Paper in the new Holiday Catalog. You’ll find the whole Gilded Autumn Suite on pages 44-46. All Suites in this catalog get a three-page spread! The Suite contains the Beautiful Autumn Bundle with stamp set and three punches, ribbon, Brushed Metallic Cardstock, and Acorn Trinkets. You can order the whole thing with one Suite number or order any of the products individually.
I loved the sample in the catalog on page 44 with the three panels of designer paper on it, center of page. I changed mine a little bit and figured out my own measurements. The card base is Whisper White, although you could also use Very Vanilla. The Copper Foil layer underneath the designer paper is cut at 5″ x 3 3/4″. The strips of designer paper are cut at 1 1/2″ x 3 1/2″ so there is a tiny margin around the edges and in between the pieces. You can vary this and have the papers side by side or even a little larger with a larger foil layer underneath. When I finished gluing these pieces with my new Stampin’ Seal+ I ended up trimming just a slight bit off the side of the copper foil just to even things up.
The greeting is stamped from the Gather Together Stamp Set, a “returning fave” it says in the catalog, from last year in Mint Macaron Ink! We all did love that stamp set and cards we made with that set last year so I’m glad it is back! I die cut it with one of the Tasteful Labels Dies and used another longer one to cut out a strip of Copper Foil to go behind it. This is a great die set!
The catalog sample card has some greenery sticking out from the side of the greeting. I don’t know how they did theirs, but I just cut some greenery out from one of the sheets of the Gilded Autumn Paper. It wasn’t so easy, but it worked! And I put it on both sides of my greeting.
And then, just because I loved the paper with pumpkins and gourds, I had to cut out a pumpkin and add it to the card. I wasn’t sure! What do you think? I popped it up with a Dimensional to match the greeting that was also popped up, but I put the Dimensional only in one spot to it would be even with the greeting. I meant to add some sequins or some little bling but I forgot!
Here is a card I made last year with the Gather Together Stamp Set. I think I could use this same basic layout and make something with the new Gilded Autumn Paper! I might try that!
I think it is a fairly easy card to make, especially if you use my measurements and don’t have to figure it out. Maybe you could die cut some other greenery for a similar look without cutting by hand if you didn’t want to do that. You could die cut the greeting in a different shape. Lots of possibilities with this Gilded Autumn Fall Thanks Card.
Remember, we have a new look to the Online Store! If you haven’t used it yet, you need to either KNOW your password to get into your account if you want to order (you can look around without logging in) so you can type it in manually OR you need to click on the “Forgot Your Password” Button to reset it. After that you can have the site remember the password….and maybe a good idea to write it down!
Thanksgiving will be here soon, although this idea can be used at any time of the year, and perhaps if you are going to someone else’s home, you might like to take a hostess gift such as a bottle of wine or other beverage. Rather than just take an ordinary bottle of wine, decorate it with your personal touch by making a Gather Together Fall Wine Bottle Tag such as this one. You can make it as easy and simple or as fancy as you like!
The basic idea is a piece of cardstock to hang down the partial length of the bottle with a score line at the top with a punched hole to make the hanger. Without the score line, the tag would just hang and stick out. You may need to alter these measurements to fit your bottle, but the project is easy enough to understand and you can make adjustments for your individual project.
For this exact project, I began with a piece of Blackberry Bliss Cardstock 9″ x 3″. It is scored at 2 1/2″ down from the top. You can either eyeball the center or measure accurately to find the center of this top portion in order to punch a hole to go over the wine bottle. I used a 1 3/8″ Scallop Circle Punch to make the hole. You could also use a circle die.
Next, I cut a piece of Very Vanilla Cardstock to layer on the Blackberry Bliss Cardstock at 6 1/4″ x 2 3/4″. I stamped three leaves with the Gather Together Stamp Set in the same color ink as the cardstock in Pumpkin Pie, Crushed Curry, and Old Olive. If you have the Gathered Leaves Dies, you can die cut the leaves, or if not, just use Paper Snips to cut out by hand (as I did!). The pumpkin is also stamped and cut out.
The greeting is stamped from the Gather Together Stamp Set in Blackberry Bliss Ink and lightly stamped in Crushed Curry with the little wheat stamp for a little interest. It is die-cut with the Layering Ovals Dies and layered on a Stitched Shapes oval die. I put a piece of underneath the popped up greeting.
As I laid out the design of the tag, I decided to add some color to the Very Vanilla layer on the Blackberry Bliss. I simply took a sponge and sponged on some Pumpkin Pie Ink, Crushed Curry Ink, Old Olive Ink, and Blackberry Bliss Ink very lightly. It just adds a little more of a fall look.
I sponged on these colors, then adhered the Crushed Curry 3/8″ Crinkled Seam Binding Ribbon under the popped up greeting at the bottom of the tag. Next, I placed the leaves with the top and bottom leaves being adhered straight on to the tag and the middle one popped up on Stampin’ Dimensionals. I also tucked in the little stamped pumpkin by the greeting and leaf.
Here are another bottle tag I made in the past and another to give you other ideas and see how easy they are to make! And like I said, they could be designed for a birthday celebration or other occasion.
Here is a photo of the entire tag not hanging on the wine bottle to see how the top is made.
If you wanted to take an extra little hostess gift, you could also make an assortment of cards that matched the colored leaves and design on the tag. Give this little project a try and then keep it in mind when you are going somewhere and want to take a gift!
This Gather Together Fall Leaves Card is a fairly easy one to make to show off the beautiful colors of autumn. I’m pretty sure I got this idea from another Demonstrator but I think I changed it up a little bit. I don’t remember where I saw the idea, but of course, the internet is full of ideas if you don’t have your own!
Fall is such a great season with all the beautiful colors and symbols such as colored leaves, pumpkins, scarecrows, fall flowers, etc. For this card, I made colored leaves by stamping with Stazon Ink in Black and then coloring in with various colors of Stampin’ Write Markers. I believe I used a little bit of yellow, a couple of greens, and some orange. If you start with the lightest color then you can color over with increasingly darker colors without picking up dark ink on a light marker.
The leaves are stamped with the Gather Together Stamp Set. I don’t own the Gathered Leaves Dies so I just cut out the leaves by hand. The greeting is also in the stamp set. It is stamped in Early Espresso Ink and layered on a scalloped circle of Early Espresso. The Crushed Curry Crinkled Seam Binding ribbon is placed in a fun way. Just go back and forth behind the greeting and hold it down either with Snail Adhesive or put Stampin’ Dimensionals on the back.
The card base is Early Espresso and the cardstock layer is (I think, cuz I already mailed it!) Garden Green. You could use any green that you like. It is embossed with the very pretty Stylish Scroll Embossing Folder. This folder can provide a beautiful background for many cards.
On the inside of the card, you may need to put a Whisper White or Very Vanilla layer so you can stamp a greeting or especially write a personal note with the dark cardstock. Stamp a leaf or something from the stamp set inside or add a matching strip of cardstock to decorate the inside a little bit.
Here is a closeup of the card so you can see the nice embossing design.
Have fun coloring some fall leaves and decorating your cards or projects with them. If you want to use Stampin’ Blends for coloring, stamp with Memento Ink. We are in the thick of autumn right now so you can make cards like this Gather Together Fall Leaves Card for birthdays or even the upcoming Thanksgiving holiday. Just change the greeting for whatever occasion you need.
I’ve made and seen cards like this Geometric Card For Fall With the Tailored Tag Punch and saw one recently online. I changed the kind of paper to make it look like fall, added the greeting, a little stamping and of course, a pumpkin! What says fall more than a pumpkin?! You could make and send this card now just for fall, a card for someone who doesn’t celebrate Halloween, or save it for closer to Thanksgiving. You can also make this same card with different paper and a different greeting for a birthday or lots of other occasions.
The card base is Whisper White Thick Cardstock to give it a little heft. The paper is the Come To Gather Designer Series Paper, the pattern with little groupings of pumpkins. You might think this card would be difficult to make, fitting in all those pieces like a puzzle! But no, you just start somewhere and space out the punched pieces, allowing them to hang out over the edge of the cardstock underneath. After you have them placed how you like, glue them down. Turn the paper over and trim off the excess hanging off the edges. Check out the photos below to see how I did this layout and then trimmed off the pieces hanging over on the other side.
The greeting is stamped with the Gather Together Stamp Set in Cajun Craze Ink and then punched out with the Tailored Tag Punch. I thought it looked a little too stark so I stamped the wheat stamp in Granny Apple Green Ink, stamped off once or twice. I just wanted it fairly light.
I also stamped and colored in a pumpkin from the Gather Together Stamp Set. It is colored with Stampin’ Blends Markers in various colors. You can choose whatever look you want for your pumpkin. I started with a bit of Daffodil Delight with Pumpkin Pie and then added some Cajun Craze to match the paper better with the darker shade.
The designer paper pieces are all adhered directly to the card front, but the greeting is popped up on Stampin’ Dimensionals®, as is the pumpkin. Here is a similar card made with the Wood Textures Designer Paper last year so you can see a different idea and occasion.
There are infinite possibilities for making a card like this using different papers and greetings! Try it and see what you think!
We can do so many things with all our Stampin’ Up! products and supplies and papercrafting skills, like making a piece of home decor such as this Gather Together Fall Votive Holder. I think the colors and items of fall just inspire us so much, like pumpkins, leaves, gourds, mums, scarecrows, and more. That’s what makes it so fun, especially getting relief from the heat of summer!
You can easily make something like this, probably with something you already have in your house, or you can make it for a gift for someone. All you have to do is add a candle inside or one of the flameless ones to be extra safe. If you are using a real candle, make sure the paper is nowhere near the top of the votive holder.
It’s funny how I can start a project with one idea in mind and then come up with something totally unplanned. I almost don’t need to tell you how to make this exactly because I’m sure you have something very similar in your stash and can use what you have.
I started with a checked strip of the Come To Gather Designer Series Paper. When you are using glass, it would be nice if you can to use something that also looks good on the inside since it will be able to be seen. Although unplanned, this strip happens to have the same pumpkins on the opposite side which you can see through the inside of the glass that I used on the decoration.
I started out thinking I was just going to do something with colored leaves but it’s hard to resist the siren call of the beautiful Come To Gather Designer Series Paper. I cut out some of the pumpkins from the paper and I also found some stamped pumpkins from the Gather Together Stamp Set in my stash that I had already colored with Stampin’ Blends. I thought they still fit in with the other pumpkins even though they are more colorful. Next, I stuck in some stamped and die-cut or punched leaves I had just done or already had in my stash. The larger leaves are from the Rooted In Nature Stamp Set.
Once I decided my pumpkins and leaves needed a little background, I die cut a piece from the Ornate Frames Dies. You should really check out these dies because they are pictured in the Halloween section but they CERTAINLY can be used for other things. There is nothing “Halloween” about them. I think they will be very useful well past Halloween. I die cut a large one out of Pretty Peacock Cardstock, even though it is barely visible.
Play around with your elements before adhering and see what layout you like the best. Some of the pumpkins are popped up with Stampin’ Dimensionals® and some are flat. Then I stuck in the leaves and sprigs of greenery wherever I thought they would look good.
Votive holders like this one are fun to decorate for any holiday or occasion so stock up a few at the dollar store or wherever you find them! Here is a Christmas one I made a few years ago. You could also decorate all the way around the holder. So many possibilities!
I’m celebrating today with this Gather Together Fall Card on the First Day of Fall even though in Houston, Texas we are a LONG way from it feeling like fall! If only!! Maybe someday before Christmas the weather will cool off so that we can walk outside and feel comfortable! But being able to make cards and projects with stamps, ink, and paper to express the feeling of fall does help a little bit!
This card starts with a base of Pear Pizzazz Cardstock with a layer of designer paper in the Come To Gather Designer Series Paper Package. This print has tiny little pumpkins with wheat and grass in the background with a Cajun Craze colored background.
I began with the greeting in the Gather Together Stamp Set. I stamped the greeting with Cajun Craze Ink and then die cut it with one of the dies in the Ornate Frames Dies. I layered it on a die cut circle of Cajun Craze to help it stand out a bit more. For the background I die cut a piece from the Stitched Nested Labels Dies in Pear Pizzazz and stamped some wheat randomly for some interest in the background. I adhered two pieces of 5/8″ Burlap Ribbon to each end of this piece. The pumpkins are stamped and colored with Stampin’ Blends and then cut out with Paper Snips (you can also purchase the Gathered Leaves Dies). I also stamped the wheat in Crumb Cake In and cut it out by hand as well. This whole focal point of the card is popped up on Stampin’ Dimensionals®.
That’s all there is to this card. It made me feel cooler just making it! LOL! This would be a great card to send for a Thanksgiving greeting or even just a card to mail during the autumn season!
Yesterday was my husband’s birthday so instead of a card, I decided to make this Mini Curvy Keepsake Box For A Fall Birthday. I was looking online for ideas, thinking of something birthday-ish or fall-ish and I saw this idea of making a window in the box so you can see the candy or treat inside! I thought that looked pretty cute so that is the main idea I went with!
Instead of cardstock, I used a piece of the Come To Gather Designer Series Paper. I wanted something that would look good on the outside as well as the inside. The inside doesn’t really matter, but if you are making a fall box, you probably don’t want to use a Christmas paper with a generic pattern for the outside and some Christmasy pattern on the inside of your fall box! Depending on the pattern, pay attention to the direction of your paper. Think about which way the design will go on the outside of the box and maybe even the inside of the box.
What you need for this Mini Curvy Keepsakes Box Die is a piece of 6″ x 6″ paper. Then lay the die down with the points diagonally on the paper. If you put any point straight up on the paper, it will not fit.
After die-cutting the box piece and creasing the score lines and folding, I decided on which panel I was going to put the little window. Ultimately I decided on the 1 3/8″ Scallop Circle Punch for the punched hole. Since the area was so small and narrow, I actually die cut a piece of window sheet for one panel and then trimmed that down by hand to fit the area. I just used Snail Adhesive in tiny bits around the hole to hold the window sheet in place.
I just recently made my first box with my daughter on vacation and I couldn’t figure out how to hook the top together! Luckily a video provided the answer! As you are trying to fit the side pieces with the long slits over the “handles”, PRESS DOWN! That lowers the handles, provides the curve to the box and allows the slit pieces to fit over the handles and hold everything in place! Very easy but I didn’t know to do that until I watched a video!
In order to put the candy in the box, I assembled the box except for one side. Then I could put the candy in and fill it up.
Then all was left was to decorate the box! I stamped some leaves with the Gather Together Stamp Set, die-cut some brown stems with a little die in the Mini Curvy Keepsake Box Dies, and punched some stems with the Sprig Punch out of Crushed Curry for some color. I also punched some Old Olive leaves with the Leaf Punch. Then I over-stamped those leaves with the large leaf stamp in the Gather Together Stamp Set.
My birthday greeting is stamped with Pretty Peacock Ink and a stamp from the Itty Bitty Greetings Stamp Set. Then I just die cut the greeting with a die from theOrnate Frames Dies and tied the box handles together with a piece ofCrumb Cake Nature’s Twine. I just poked the twine through the hole on my greeting tag and pulled the tag up to the box.
I didn’t initially order these dies to make these Mini Curvy Keepsake Boxes but I’m glad I did as there is a LOT you can do with them! Check them out in the Stampin’ Up! Holiday Catalog!
Sometimes I just get out some paper and stamps and have no idea where the stamping will lead and what will turn out, but today this Gather Together Pumpkin Card is what came out of some stamping, coloring, and paper cutting!
Who doesn’t love pumpkins, especially as fall is approaching?! Nothing says fall, and eventually Halloween, like pumpkins! These pumpkin stamps are in the Gather Together Stamp Set in the Holiday Catalog. I decided to stamp the pumpkins with Sahara Sand Ink so there wouldn’t be the bold, black lines of Memento Ink that I would normally use. I did go ahead and used Stampin’ Blends to color in the pumpkins and it seemed to work okay. I started with the Pumpkin Pie Light and Dark colors but added a bit of Light Cajun Craze for some contrast. The stems I first colored with a bit of Soft Suede Blends, but I also tried to add just a bit of Old Olive green and a bit of the Light on the pumpkins. Some pumpkins are popped up with Stampin’ Dimensionals.®
There is a set of dies that go with this stamp set, Gathered Leaves Dies. I haven’t purchased these yet, but they would be great for making the embossed leaves. I wish I would have ordered them! Since I don’t have the dies, I just hand cut the pumpkins with my Paper Snips. You can, however, save 10% if you purchase the Gather Together Stamp Set and the Gathered Leaves Dies in a Bundle, the Gather Together Bundle.
The card base is Early Espresso Card Stock with a layer of the wood grain pattern in the Come To Gather Designer Series Paper. For the banner with the greeting, I die cut a piece of Sahara Sand Cardstock with the Stitched Nested Labels Dies and just cut off the top to line up with the top of the card. The Sahara Sand is layered on a die-cut of Early Espresso. The greeting is just cut to fit on the banner. By the way, the banner was first stamped with the wheat-looking stamp for a little something in the background.
Once I got the banner made with the greeting and then added the Garden Green 3/8″ Double-Stitched Ribbon tied in a bow, that’s when I was satisfied with what I was creating! Sometimes it just takes playing around and then having that “moment” when you know you have something you like. You will find this pretty ribbon in the Toile Tidings Suite, but there is no reason why you can’t use it for fall and Halloween.
There is so much to like about the Come To Gather Suite. You can make cards for fall, Thanksgiving, and even maybe Halloween! Such pretty colors in the designer paper and even some wooden elements, the Tags & Feathers Elements, that you can use for stamping or embellishing. Think of many creative projects you can use with these products as well, some pretty home decor and other things. Fall is such a great time of year! I will be glad when it feels like fall in Houston, Texas!
I thought if I made this Gather Together Pumpkin Card For Fall it would cool me off from the very hot summer temperatures in Houston, Texas. It did bring a rainstorm which knocked a few degrees off the temperature! I love these new colors for fall, something modern and different!
This card uses the very pretty Come To Gather Designer Series Paper. I can’t wait to use all of the other designs in the package, especially the bright, modern plaid. For this card, I began with a card base of Pretty Peacock Cardstock and a layer of Pear Pizzazz. Then I chose the designer paper with the whitish pumpkins. On the opposite side was the Pretty Peacock gingham check design which I also liked so I cut a strip, turned it over and used it at the bottom of the card. To cover up the seam from the two papers, I just placed some 3/16″ Braided Linen Trim around the card.
I didn’t purchase the Gathered Leaves Dies in the Suite (because even Demonstrators can’t buy everything!) so I just stamped the pumpkins on Whisper White Cardstock with Pear Pizzazz Ink. Some I stamped with full ink and some I stamped off first and then stamped for a lighter shade with less ink. After stamping the pumpkins, I just cut them out with my Paper Snips, which as easy enough.
To make the pumpkins stand out on the card, I wanted some kind of background. I decided to try this piece die cut from the Stitched Nested Labels Dies in Pretty Peacock. To add a little interest I stamped in Pretty Peacock ink the wheat image from the Gather Together Stamp Set. Then I added two small copper brads from the Metallic Brads. It seems like years ago brads were a really big deal for embellishments, but I don’t think they are used or talked about as much these days. But I thought they seemed like the perfect little bling to add on this card! I poked a hole first with the sharp pointy end of the Take Your Pick Tool with the paper on the Stampin’ Pierce Mat, then inserted the brad into each hole. You can flatten the brads well by pushing down on the top of the brad with something heavier, like an acrylic block or the wide part of your scissors or whatever is handy.
This label piece is placed a little lower on the card because I didn’t want to cover up all the pumpkins printed on the designer paper! Then the cut out pumpkins are placed a little lower on the label so as not to cover up the stamping on the label! This whole piece is then popped up on Stampin’ Dimensionals.
The next dilemma was how to add a greeting without covering up too much of the card! I used the greeting from the Gather Together Stamp Set, stamped in Pretty Peacock and die cut with a Layering Oval Die. I ended up, as you can see, adding it right to the top of the die-cut label, overlapping a bit. It is a little different, but I think it turned out okay. In order to make it even with the Pretty Peacock label, I put dimensionals just under the top part of the greeting so it would be the same height as the label.
It was fun making a fall card even though I didn’t get to put on a sweater! It is still plenty hot, but at least this card gives the promise of fall! I just love the thought of fall colors and pumpkins and everything that goes with that theme! When you receive your Stampin’ Up! Holiday Catalog and begin to place your order(s)….and believe me, there will be orderS, plural!…..you will want to choose some of the fall-themed stamp sets and papers for a change of seasons or Thanksgiving or use some of the generic colors just for a switch in colors for your cards and projects.
Pumpkins, these days, seem to come in all colors and textures so you can be very creative! Here is a post from last year with traditional orange pumpkins but with a bright green polka dot background, but you could use the same design to make a card with these new 2019 colors! I saw some beautiful fabric pumpkins on Instagram the other day, some even embroidered, all different kinds of fabrics, not just orange. Yet they all look appropriate for fall and into Thanksgiving. So don’t be afraid to try some non-traditional colors in your pumpkins and fall cards like this Gather Together Pumpkin Card For Fall.
