Tag Archives: Lots of Heart Stamp Set

Playful Alphabet Valentine

Leave a reply
Playful Alphabet Valentine

Express your love with some “X’s” and “O’s” plus hearts on a card like this Playful Alphabet Valentine. It requires some die-cutting and a little stamping, but it’s a fun card to make and I’m sure to receive!

The card base is Real Red with a layer of Basic White Cardstock. I cut it a little smaller than normal (5″ x 3 3/4″) to allow more of the Real Red card base to show. I also cut a strip of Basic White (5″ x 1″) layered on a wider strip of Real Red (5″ x 1 1/4″) for the center (or so) of the card on which to layer the X’s and O’s.

I used the Playful Alphabet Dies to cut out the X’s and O’s and adhered them to the Basic White Strip with tiny dots of Multipurpose Liquid Glue. For an extra embellishment, I die-cut two strips of hearts in the Many Hearts Dies.

The little red hearts at the top and bottom of the card are from the Lots of Heart Stamp Set. Normally I might stamp the little hearts randomly on the area where I want them to show, but with the strips of die-cut hearts having open hearts, I didn’t want stamping interfering behind them. I probably should have positioned the center portion of the card better so the hearts at the bottom weren’t so crowded. But I doubt the recipient will be as critical as we are of our own work! We should remember that as we are making and stamping our cards!

That’s all there is to this card. On the inside, you might add a Basic White layer either stamped with a few hearts in the corner or along the top or bottom, or maybe add another X and O for fun! You could just stamp a greeting on the Real Red in black ink, too.

On the front of the card, if you wanted to embellish more, you could add the little Resin Hearts or rhinestones at the beginning and ending of the X’s and O’s. I might have done that, but I also thought maybe the card was busy enough and didn’t need anything extra.

Valentine’s Day is coming soon so take some time to make some valentines for your family or maybe some to mail! Receiving your card might be the only Valentine celebration they have this year! Use this Playful Alphabet Valentine to give you some ideas for making your own valentines today!

Lots of Heart Happy Valentine’s Day Card

Leave a reply
Lots of Heart Happy Valentine's Day Card

It’s time to make some Valentines and this Lots of Heart Happy Valentine’s Day Card is an easy, traditional one to make! I like Valentines made with other colors, but what says Happy Valentine’s Day better than Real Red?!

The card base is Real Red. I think Stampin’ Up!’s best color is Real Red. There are other “reds” out there in the world but when you compare to Real Red, which is a full, true, “real” red color, you can’t beat Stampin’ Up!

For the Basic White layer, (formerly Whisper White) before I even knew exactly what card I was going to make, I just stamped randomly with the little flowers in the Lots of Heart Stamp Set in Real Red Ink. Certainly don’t put this stamp set away after Valentine’s Day because it’s not just for Valentines! I’m already thinking what a pretty spring card I could make with this little flower stamp!

Coordinating with the Lots of Heart Stamp Set are the Many Hearts Dies. You can purchase both these items in the Lots of Heart Bundle. I just love this scalloped heart die-cut! I cut that out of Real Red and layered with a plain white die-cut heart. I thought about different ideas, but in the end, I just wanted to stamp “Happy Valentine’s Day” on the heart. I found that greeting in my Meant To Be Stamp Set in the Annual Catalog on page 69. You may already have this stamp set! (There are dies to go with this stamp set, too, which you may already have!)

The scalloped heart is popped up with Stampin’ Dimensionals®. For a little bit of bling, I decided to see if the Resin Hearts Embellishments would work. They are very small and I thought that was perfect for this card! Just a little something without being too much around the greeting. I doubt they would show up very well on the background.

So there you have a basic, traditional, easy-to-make Valentine card! We better get busy if we want to have Valentines to mail soon! Have fun making something like this Lots of Heart Happy Valentine’s Day Card.

True Love Red Floral Card

2 Replies
True Love Red Floral Card

Would you believe this True Love Red Floral Card is made from the True Love Designer Series Paper except for the vellum and the greeting? This black and white designer paper with all sorts of designs give you all sorts of opportunities to be creative!

To make this card, I decided to copy a sample card in the January-June 2021 Mini Catalog on page 10 in the Love You Always Suite. I changed the colors of the flowers and how I arranged them and I put a different greeting on my card. My greeting took up a little extended space since it was longer and narrower than the sample card, so that caused me to move the flowers around a little.

The card base is Thick Whisper White and the striped pattern of the True Love Designer Series Paper covers the whole front of the card base. I didn’t leave any margin. The piece of vellum is 5 1/2″ x 3 1/4″. You could make yours any size. Just don’t glue it down yet because glue and other adhesives show through vellum.

Then I chose another of the patterns in the designer series with these flowers. I decided which ones I wanted as close to the edge of the paper as I could get and cut those out of the sheet. I colored them in with Stampin’ Blends Markers, the Light and Dark Real Red. I wanted my card to be black, white and Real Red! The flower center is just colored with Dark Daffodil Delight. The leaves are Granny Apple Green, Light and Dark, along with a touch of Daffodil Delight. An artist friend I know always said to mix some yellow in with green, so I do!

You can leave the flowers in the group in which they appear on the designer paper or if you need to cut them apart to make them fit on your card you can do that. Some I popped up on Stampin’ Dimensionals and one flower and one leaf is adhered right on the vellum.

The greeting is stamped in Real Red Ink on Whisper White from the Lots of Heart Stamp Set. It is die-cut with a die in the Tasteful Labels Dies as is the Real Red piece behind it.

If you place and adhere everything on to the vellum before you attach it to the card, you can turn the vellum over and apply adhesive on areas that are covered by the greeting and flowers on the front. That will hold it on to the card front without showing the adhesive through the vellum. I used Stampin’ Seal.

When you are looking for card ideas, if you don’t already have one in your head, think about looking at any of your Stampin’ Up! catalogs! You can copy any of the ideas, and most likely you will come up with your own version once you start creating!

Remember, Sale-A-Bration is going on so with every $50 you spend, you earn a free product in the Sale-A-Bration Brochure! No limit!

Be sure to check out the black and white True Love Designer Series Paper so you can have fun either designing with it as is or using different methods of coloring it like on this True Love Red Floral Card.

True Love Red Floral Card Closeup

Trio of Hearts Valentine Card

Leave a reply

You get lots of hearts in the stamp set and dies I used to make this easy slim card, Trio of Hearts Valentine Card, for Valentine’s Day or really any time! These hearts are pretty big but they still fit perfectly on this slimline card.

I just got the Lots of Heart Bundle, which has the Lots of Heart Stamp Set and the Many Hearts Dies. And there really are many heart dies in that set! In fact, I recommend making a copy of the sheet with all the dies still adhered with your printer and keep it with your dies so you can see clearly what you are supposed to have! There are 15 different dies in the set!

To make this card, I decided to make pastel-colored hearts so I started with a card base of Pool Party Cardstock. I cut the paper 6″ x 6″ so that when I folded it in half, it would be 3″ x 6″ for a slimline card. The Whisper White layer is just a tiny bit narrower than the card base, 2 7/8″ x 5 7/8″.

I stamped the hearts on another piece of Whisper White and then die cut with one of the heart dies. This heart die also cuts a narrow outline of the heart, which I didn’t notice at first so the excess paper was getting left in the die. If you have this set, make sure you check the underside of your heart die because if you cut several times, that paper still stuck in the die will prevent getting a complete cut after awhile!

The hearts are stamped in Blushing Bride, Mint Macaron, and Pool Party ink. Since the photopolymer stamps are new, even though I wiped them on my Shammy a couple of times, the ink still beaded up a tiny bit when I stamped, but I don’t think it’s anything that’s bad enough to jump out. I adhered the hearts flat on the white card layer, but I could have popped them up on Stampin’ Dimensionals. Either way is fine. I did stamp the greeting in Pool Party Ink and then popped that up on Dimensionals. The greeting is in the Lots of Heart Stamp Set.

I almost left it as is at that point, but I decided to add some Champagne Rhinestone Basic Jewels. Who can resist a few rhinestones?! And for a final touch, I just used a piece of white twine I had to make a little bow on the center heart, adhered with a rolled-up Mini Glue Dot.

This is one example of how you can make an easy Valentine using three hearts in the Lots of Heart Stamp Set in the January-June 2021 Mini Catalog on page 15.

SHOP STAMPIN’ UP! ONLINE HERE!